|
Spherical Bridge Bearing – Low Friction and Excellent Accommodation Feature
One spherical bearing pad with words illustrate its structure composing.
SBP-01: Spherical bearing pad with the PTFE sheet embedded into the plates to reduce the friction coefficient for displacement assurance.
Spherical bridge bearing, also called spherical bearing, spherical bearing pad, is designed to ensure vertical and horizontal forces transferring under control which is a connection devices between superstructures and substructures. It consists of steel plate enclosed with edge sliding guide and stainless steel panel for sliding controlling, under the stainless steel panel is a PTFE sheet, which is recessed into the steel to a depth and contains a special lubricant to ensure permanent lubrication of the sliding surfaces. Then there is a stainless steel panel with a convex bottom face to facilitate rotations. The bottom component is concave steel plate that covered with a recessed PTFE sheet to transfer whether horizontal or vertical forces safely.
Classification
The spherical bridge bearings are classified into three types according to different sliding direction.
Fixed type. Provide rotations capacity from any direction only.
Guided type (Uni-directional sliding). Rotation plus movement in one direction.
Free sliding (multi-directional sliding). Rotation plus movement in all directions.
A profile map of fixed type spherical bridge bearing.
SBB-02: Fixed spherical bridge bearing.
A profile map of guided type spherical bridge bearing.
SBB-03: Guided spherical bridge bearing.
A profile map of free sliding type spherical bridge bearing.
SBB-04: Free Sliding spherical bridge bearing.
Specification
Material Steel and PTFE sliding plate.
Working temperature range
Normal type: -25 °C to +60 °C.
Cold resistant type: -40 °C to +60 °C.
Friction coefficient
(In condition of PTFE layer with silicon grease lubrication and stresses about 30 MPa)
Normal temperature: 0.03.
Low temperature: 0.05.
Bearing horizontal force
Guided type: Horizontal force is 10% vertical bearing capacity.
Fixed type: horizontal force is 10% vertical bearing capacity.
Vertical bearing capacity 1000, 1500, 2000, 2500, 3000, 4000, 5000, 6000, 8000, 9000, 10000, 12500, 15000, 17500, 2000 kN.
Displacement
In longitudinal direction
1000–2500 kN, 50/100 mm.
3000–20000 kN, 50/100/150 mm.
In transverse direction: ± 40 mm.
Popular specifications
Fixed type spherical bridge bearing.
Guided type spherical bridge bearing.
Free sliding type spherical bridge bearing.
Production & Package
A concave steel plate on the ground.
SBB-05: Concave steel plate prepare.
A black PTFE plate on the concave steel plate.
SBB-06: Bottom PTFE plate install.
A convex spherical plate on the ground.
SBB-07: Convex spherical plate install.
A flat PTFE plate on the convex spherical plate.
SBB-08: Flat PTFE plate install.
A completed spherical bridge bearing on the shelf.
SBB-09: Top steel plate install.
Several bundles of spherical bridge bearings on the ground.
SBB-10: Package.
Features
Available in any directions movements.
For the PTFE sheet, there are minimum sliding friction coefficient.
PTFE sheet with lubricant to reduce sliding friction.
Accommodate high rotations and any directional movements.
Suitable for low temperature regions.
The effect on concrete reaction is homogeneous.
Strong enough for long time service.
Complying with BS EN-1337, KS4424, AASHO, ISO or other custom standards.
Application
Spherical bridge bearings are designed for bridges or structures where very high vertical, horizontal and lateral loads are needed.
It is can also be used in places where large rotational structural displacement are needed to be accommodated.
Spherical bridge bearing can be used in different complex bridges, such as curved bridges, skew bridges, right bridges.
Several workers are installing the spherical bearings in construction site.
SBB-11: Construction site of structure spherical bearing.
Several workers are install the large spherical bridge bearing.
SBB-12: Construction site of bridge spherical bearing.
A spherical bearing is installed on the building foundation.
SBB-13: Spherical bearing for building structure stability.
Several spherical bearings are installed on the pier of bridge.
SBB-14: Spherical bearing for bridge durability.
|
